Thermador Induction Range Cooktop F8 + H/h: Automatic Time Limit

What F8 + H/h means

F8 together with an H or h on the induction side of Thermador Pro Harmony and Masterpiece MRI304DL ranges means a cooking zone ran continuously for a long time without any interaction and the automatic time limitation triggered, so the zones do not heat. It is a built-in safety limit rather than damage. Other generations use F8 differently.

Usual causes of F8 + H/h

Automatic time limitation

✓ A safe check worth trying

1. Switch the zones off. 2. Touch a control to clear the message. 3. Start cooking again. 4. If it triggers after only a short time, note how long the zone had run and call us. Keep an eye on how long the zone stays on.

! Why you should stop here

Normally no repair is needed.
Early triggering needs a technician's check.
A written quote comes first.

Taking off a panel yourself does not by default void a manufacturer warranty, yet it can lead to accidental damage, and some manufacturers attach their own service terms. Read your warranty paperwork, or ask us, before you decide.

→Same appliance

More Range codes

E5Legacy Pro-Harmony Thermador Range E5 Means Potentiometer Failure (Light Code 21) F9Legacy Thermador ESC30/GSC30 Range with F9: Door Latch Supervisory Error E6Thermador PDR/PRG Range E6, Blue Lights 3-then-2: Over Temperature While Cooking F1Legacy RDF/REF 30-Inch Range F1: Stuck Buttons or Latch Switch E7Cleaning Cycle Stopped by E7 on a Legacy Thermador Pro-Harmony Range (Code 23) F3Legacy RDF/REF 30-Inch Range F3: Open or Shorted Oven Sensor E9Legacy Thermador Range E9: No Cooling Fans, Blue-Light Code 43 E7010Thermador Induction Range Cooktop E7010: Wi-Fi or Hood Connection Lost

F8 + H/hF8 + H/h questions

Is the cooktop broken?

No. The manufacturer text describes a time limit that ends long unattended cooking. Resetting and restarting is the normal response. No repair is expected. Nothing is wrong with the glass.

What do the H and h mean?

They appear together with F8 for the time limit, per the manufacturer text. We do not read more into them than the source says. We read them as the source does.

When should I call you?

If the limit triggers during short cooking, or the zones stay dead after a reset, call us so we can check the cooktop. Include how long the zone had been on.