Booking today · Houston · three-hour arrival windows Thermador repair specialists, independent · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 597-4873 Book an Appointment
Common Problems · 4 min read

Speed Oven or Built-In Microwave: Which Thermador Do You Have?

A Thermador speed oven combines microwave and convection heating, while a standard built-in microwave has no convection side. Here is how to tell which you own.

A Thermador speed oven combines microwave and convection heating in one cavity, while a standard built-in microwave only cooks with microwaves. From the front they can look alike, but inside they differ. The speed oven has a more elaborate control board and extra heating parts, so the right repair starts with knowing which one you have.

How are a speed oven and a built-in microwave different?

From the front, the two can look similar. Inside they are quite different. A speed oven joins microwave and convection heating in one body, and its control board is more elaborate than the one in a regular microwave.

A standard microwave heats with microwave energy only. A speed oven can also brown and crisp food because it has a convection heating element and a fan, which is why many owners treat it as a small second oven.

What can go wrong in each one?

  • Standard microwave: the magnetron and the control electronics.
  • Speed oven: the same magnetron and electronics, plus the convection heating element and its fan.

That gives the speed oven extra parts that can wear out. The two platforms do not share the same common failure points, so a repair plan for one does not simply carry over to the other.

Why does it help to know which one you have?

If a speed oven microwaves food but never browns it, our attention goes to the convection side. If nothing heats at all, the shared electronics move up the list. A standard microwave has no convection side to blame, so the search begins elsewhere.

Knowing the type also tells us which parts to bring. Arriving with a sensible idea of where to look first saves time and often avoids a second trip.

How do the problems line up?

What you notice Standard microwave Speed oven What it suggests
Microwaves but never browns Not applicable Possible Convection element or fan
Nothing heats at all Possible Possible Shared electronics or magnetron
Fan noise or no air movement Cooling fan only Cooling or convection fan Fan motor or blockage
Display or keypad unresponsive Possible Possible Control board or keypad
Food heats unevenly in one mode Rare Possible Mode-specific part, not the whole unit

What should you tell the technician?

  1. Whether you own a speed oven or a standard microwave.
  2. Which mode misbehaves: microwave, convection, or both.
  3. Any code or message shown on the display.
  4. Whether it happens every time or only now and then.

Look for the model plate if you are unsure which you own. It is often visible around the door frame or inside the cavity, and reading it to us over the phone is enough to tell the two apart. Do not remove panels to look for it, since the area behind them is not safe for home checks.

Why does a speed oven need more careful diagnosis?

Two cooking methods share one cavity, one door, and one control board. When something stops working, the cause can sit on either side, or in the electronics that coordinate both. That is why a short description of the pattern of the problem, in plain words, is worth more than a guess about a single part.

For example, a speed oven that heats in microwave mode but stays cold in convection mode narrows the search to the convection side. A unit that behaves the same in every mode points toward the control board or the power feeding it. A clicking sound, a burning smell, or visible sparks inside the cavity calls for stopping immediately and unplugging the unit if you can reach the plug safely.

Never run a microwave empty while testing it, and never use a unit with a damaged door or seal. The door and its latches keep microwave energy inside, so a bent door, cracked seal, or loose hinge is a reason to stop using the unit until it has been inspected.

Frequently asked questions

How can I tell a speed oven from a microwave by looking?

Check the controls and the model plate. A speed oven usually lists convection or bake modes as well as microwave power levels. If you only see microwave power, defrost, and time options, you likely have a standard microwave. The model plate settles it quickly.

Is it safe to open a microwave to look inside the casing?

No. Microwaves contain a high-voltage capacitor that can hold a dangerous charge even when unplugged. Leave the casing closed and describe what you see on the outside. Only a trained technician should open the cabinet and discharge the electronics before testing.

Why does my speed oven microwave food but not brown it?

The microwave and convection sides work separately. If the microwave heats but nothing browns, the convection element or its fan is the likely area. Run a plain convection mode and note whether the cavity warms. That detail points the diagnosis in the right direction.

Does the oven type change how repairs are handled?

Yes. A speed oven has more parts, so the diagnosis covers both heating methods and the board that controls them. A standard microwave has fewer parts to test. Knowing the type in advance lets the technician plan the visit properly.

Sources

A Thermador kitchen deserves a technician who knows it.

(713) 597-4873 Book an Appointment
☎ Call our office ▤ Book an Appointment