Booking today · Houston · three-hour arrival windows Thermador repair specialists, independent · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 597-4873 Book an Appointment
Error code · Oven

Thermador Wall Oven F70 in the Legacy C/CM Family: Lower Meat Probe Shorted

F70 shows on older Thermador C, CM and CJ302 ovens when the lower oven meat probe circuit reads as shorted. This is a low-severity code: it points to the probe wiring rather than the heating system.…

Minor · safe to check yourself
Code
F70
Appliance
Oven
Brand
Thermador
Warranty
30-day workmanship

What F70 means

F70 shows on older Thermador C, CM and CJ302 ovens when the lower oven meat probe circuit reads as shorted. This is a low-severity code: it points to the probe wiring rather than the heating system. If you use the probe, check it first. If you never plug it in, the short may be inside the oven wiring or on the control display board.

Usual causes of F70

  • Short in the meat probe wiring
  • Control display board, if the code persists after the wiring is checked
✓ A safe check worth trying

1. Stop the oven and let the cavity cool. 2. If a probe is plugged in, unplug it and look at the cable for damage. 3. Reset with OFF or the breaker for 3 minutes. 4. If F70 returns with no probe attached, note it and call us.

! Why you should stop here
  • The probe jack wiring runs behind the cavity wall
  • Board replacement should follow a wiring test
  • A damaged probe cable can be mistaken for a board problem
Taking off a panel yourself does not by default void a manufacturer warranty, yet it can lead to accidental damage, and some manufacturers attach their own service terms. Read your warranty paperwork, or ask us, before you decide.

Technical reference

Code
F70
Appliance
Thermador oven
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.

F70F70 questions
Do I need the probe to cook?

No. You can bake without it. If F70 blocks normal cooking, a technician should look at the probe circuit so the oven works again. Work on your oven comes with a 30-day workmanship warranty.

Could my probe be bad?

Yes, a crushed or kinked probe cable can cause a short. Trying a reset with the probe unplugged is a safe first step. Keep the data plate details nearby when you phone.

Why would the display board be involved?

The probe jack connects to the display board header. If wiring checks fine and F70 stays, the manual says that board is the next item to replace.

Request service

Not sure about F70?

Our technician checks it in your home and hands you a written price before touching anything.

☎ Call our office ▤ Book an Appointment