Legacy Thermador HGSW Hood Flashing LED D: Grease Filter Cleaning Reminder
On legacy Thermador HGSW wall hoods with mechanical push buttons, a flashing LED D is not an error. After 40 hours of use it reminds you the grease filter needs cleaning. After cleaning, press button A…
- Code
- Flashing LED D (grease filter saturation)
- Appliance
- Ventilation Hood
- Brand
- Thermador
- Warranty
- 30-day workmanship
What Flashing LED D (grease filter saturation) means
On legacy Thermador HGSW wall hoods with mechanical push buttons, a flashing LED D is not an error. After 40 hours of use it reminds you the grease filter needs cleaning. After cleaning, press button A for about 3 seconds until the signal beeps to reset the reminder. Reset the reminder this way. The reminder then starts over.
Usual causes of Flashing LED D (grease filter saturation)
- 40 hours of use
1. Switch the hood off and let it cool. 2. Remove and clean the grease filter. 3. Reinstall it. 4. Hold button A for about 3 seconds until you hear the beep. If LED D keeps flashing afterward, call us.
- This is an owner task.
- A failed reset needs a technician.
- The price is written if we visit.
Technical reference
- Code
- Flashing LED D (grease filter saturation)
- Appliance
- Thermador ventilation hood
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Ventilation Hood codes
Is LED D an error?
No. It is a reminder, after 40 hours of use, that the grease filter is saturated and needs cleaning. Cleaning the filter, then resetting, is all it asks of you.
How do I reset it?
After cleaning the filter, press button A for about 3 seconds until the signal beeps. Keep the button down until you hear it; a quick tap will not reset the reminder. Then check that LED D stays off.
Does this apply to every Thermador hood?
No. The reminder described here is for legacy HGSW wall hoods; newer hoods use other indicators. This guidance covers only the HGSW model, so we do not apply it to other hoods without checking their manual.
Not sure about Flashing LED D (grease filter saturation)?
Our technician checks it in your home and hands you a written price before touching anything.