Booking today · Houston arrival windows 8–10 · 10–12 · 12–2 · 2–4 Thermador repair specialists, independent · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 597-4873 Book an Appointment
Model library · Thermador Cooktop

PCG366W

Thermador PCG366W

What we most often repair on units like this

  1. Gas odor means closing the shutoff valve before you inspect any of the six burners
  2. With six burners in 36 inches, a weak or yellow flame stands out against its neighbors, so begin with how that burner's cap sits and whether its ports are clean
  3. The heavy total BTU load means an undersized gas line or marginal regulator is likely to show up as several burners underperforming together

The PCG366W has no griddle and packs six sealed burners into 36 inches, the most Thermador puts in that width. Its ratings are 108,000 BTU for natural gas and 90,000 for LP, plus ExtraLow simmer. All that firepower needs a good deal of gas, and that is the key to servicing it.

If just one burner looks off, we treat it as local: reseat the cap, clear the ports, test the igniter. Crowded burners make a single weak or yellow flame easy to spot beside the others. When several burners sag at the same time, however, we move away from the burners entirely and look at the line feeding them.

That means measuring supply pressure and judging whether the gas line size and regulator can handle the full load. Treating each burner separately would just be treating the effect and ignoring the supply.

Key features

  • 36-inch Professional gas rangetop with six sealed burners and no griddle
  • Output rating of 108,000 BTU on natural gas, 90,000 BTU on LP
  • ExtraLow simmer ability
  • Porcelain-and-steel top with cast-iron grates
  • Three cast-iron pan supports and island trim ship with it
→Codes

Codes this model may display

PCG366WPCG366W questions
Several burners weaken when I use them all at once. Why?

That pattern points to supply, not burners. Six burners at full flame demand a lot of gas, so a line that is too small or a marginal regulator shows up when the load is high.

One burner looks yellow while the rest are blue. What is that?

A yellow flame on a single burner generally means a partly plugged port or a cap that is not seated correctly. Cleaning the port and reseating the cap is where we start.

Is the PCG366W different from the PCG364WD?

Yes. It has six full-size burners and no griddle, while the PCG364WD gives four burners plus a griddle. The two also differ in rated output, so supply demands are not the same.

Request service

Schedule service for your PCG366W

Request a visit online in about a minute or phone our coordinators. Close-in neighborhoods often see a same-day slot; the outer counties usually get the next day across Houston.