Thermador Induction Range Cooktop E7010: Wi-Fi or Hood Connection Lost

What E7010 means

E7010 on the cooktop side of Thermador induction ranges (Pro Harmony PRD...WIGU, PRI and Masterpiece MRI304DL) is a connectivity message. The manufacturer text says the cooktop cannot connect to the home network (Wi-Fi) or to the hood. It is not described as a heating problem, so the zones may still work normally. Other Thermador generations use E-numbers differently.

Usual causes of E7010

Wi-Fi or hood connection lost

✓ A safe check worth trying

1. Confirm your home Wi-Fi works by loading a page on a phone. 2. Make sure the hood is plugged in and powered on. 3. Switch the range breaker off for a minute, then back on. 4. Check that the cooktop zones still heat. If E7010 stays and you rely on the hood link, note it and call us.

! Why you should stop here

Pairing between the range, hood and network is checked at the appliance.
Router settings are on your side, so we separate the two before touching anything.
You get the price in writing before any repair.

Taking off a panel yourself does not by default void a manufacturer warranty, yet it can lead to accidental damage, and some manufacturers attach their own service terms. Read your warranty paperwork, or ask us, before you decide.

→Same appliance

More Range codes

E13What E13 Means on a Legacy Thermador PDR/PRG Range: Vcc Lift-Off, Code 13 F2 / E7015Thermador Induction Range Cooktop F2 / E7015: Electronics Overheated EThermador Range Display Reading "E" Plus a Number E14Thermador Pro-Harmony Range with Five-and-Five Blue Lights: E14 Selector Switch Error F4 / E7015Thermador Induction Range Cooktop F4 / E7015: Electronics Overheated, All Zones Off dEThermador Range "dE" on an Induction Cooktop (Demo Mode) F1Thermador ESC30/GSC30 Range F1: Supervisory Relay Enable Shorted F5Thermador Induction Range Cooktop F5: Hot Cookware Near Control Panel

E7010E7010 questions

Does E7010 stop me from cooking?

The manufacturer text describes only a lost connection, not a shutoff. Test a zone with a pan of water; if it heats normally, the message is about the network or hood link.

Why does the hood come into it?

These induction ranges can talk to a matching hood. The message names both the home Wi-Fi and the hood, so either link being lost can bring it up.

Is this an electrical problem?

It is a connectivity message rather than a power one. Try restarting your router first, and call us if the range keeps losing the link.