Thermador C-Series Wall Oven F10 on C/CM/CJ Models: Power Board Incompatibility
F10 on a Thermador C-series oven (C271, C272, C301, C302, CM301, CM302 or CJ302) tells you the control display and the power board no longer agree with each other. The legacy service document lists it as…
- Code
- F10
- Appliance
- Oven
- Brand
- Thermador
- Warranty
- 30-day workmanship
What F10 means
F10 on a Thermador C-series oven (C271, C272, C301, C302, CM301, CM302 or CJ302) tells you the control display and the power board no longer agree with each other. The legacy service document lists it as power board incompatibility. The Care and Use manuals for these ovens use the same F-plus-two-digit wording, so a newer Thermador unit may use F10 differently. Cooking can stop until the board matter is resolved.
Usual causes of F10
- Connections between the power/relay board and the control display board
- Power/relay board incompatible with the display board, replaced if connections are good
1. Start with the manual's own reset: touch OFF, or switch the oven off at the circuit breaker, and wait three minutes. 2. Switch the power back on and look at the display. 3. If F10 returns, write down the code and call us. Connector checks and board replacement listed in the service document are technician work, not an owner step.
- The check starts at board connectors behind the control, which are live parts
- Swapping a board without testing the display link wastes money
- Board availability is checked against your model number before we write the quote
Technical reference
- Code
- F10
- Appliance
- Thermador oven
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Oven codes
Does F10 mean my oven needs a new board?
Not always. The service table first says to check connections between the power/relay board and the display board. Only if those are fine does it call for replacing the power/relay board.
Which Thermador ovens use this F10?
The manual names C271, C272, C301, C302, CM301, CM302 and CJ302 ovens. Newer Thermador models can use F10 for something else, so we match the code to your model number before diagnosing.
Why wait three minutes after switching off?
That is the manual's own instruction for these ovens. The pause lets the control fully reset before power returns, giving a fair test of whether the code was a one-time event.
Is F10 still showing?
Our technician checks it in your home and hands you a written price before touching anything.