Older Thermador Cooktop U400 on CIT365DS and CIT304E Induction Models: Cooktop Connected Incorrectly
U400 on an older CIT365DS or CIT304E induction cooktop means the cooktop is connected incorrectly. Current Thermador induction cooktops use U400 differently, so this is the older table's meaning only. It usually appears after installation, a…
- Code
- U400
- Appliance
- Cooktop
- Brand
- Thermador
- Warranty
- 30-day workmanship
What U400 means
U400 on an older CIT365DS or CIT304E induction cooktop means the cooktop is connected incorrectly. Current Thermador induction cooktops use U400 differently, so this is the older table's meaning only. It usually appears after installation, a move, or electrical work. The manual's remedy is to disconnect at the breaker or fuse, check the connection, reconnect, and call customer service if U400 returns.
Usual causes of U400
- Incorrect wiring or phase connection at the cooktop
- Loose or swapped supply conductors
- Recent installation or electrical work done improperly
1. Turn the cooktop off. 2. Switch off its circuit breaker or fuse before doing anything else. 3. Do not open wiring yourself; just confirm the cooktop's connection was not recently disturbed. 4. Restore power; if U400 appears again, leave it off and call for service.
- Checking the wiring means working on the home's 240-volt supply, which is dangerous.
- A wrong connection can damage the cooktop's electronics.
- We inspect the connection and quote in writing before changing anything.
Technical reference
- Code
- U400
- Appliance
- Thermador cooktop
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Cooktop codes
Why did U400 appear after a kitchen remodel?
The manual says the cooktop is connected incorrectly. New wiring, a moved cooktop, or a changed breaker can cause it, so the connection should be checked by a qualified person.
Can I just reset the breaker?
The manual does suggest disconnecting at the breaker or fuse and checking the connection. But if U400 comes back, it is a wiring matter and you should call customer service.
Is U400 the same on newer Thermador cooktops?
No. Current Thermador induction cooktops have their own U400 page and meaning. This one covers the older CIT365DS and CIT304E display, so check your model first.
Is U400 still showing?
Our technician checks it in your home and hands you a written price before touching anything.