Thermador Refrigerator E10 Error Code
E10 shows up and the refrigerator may act strangely. Thermador does not document the code. Two independent repair sources connect it with the power module, the board that manages the main electrical supply; one describes a…
- Code
- E10
- Appliance
- Refrigerator
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E10 means
E10 shows up and the refrigerator may act strangely. Thermador does not document the code. Two independent repair sources connect it with the power module, the board that manages the main electrical supply; one describes a software hiccup within that module, the other an outright power module failure. Since this board runs the compressor and fans, the code deserves attention.
Usual causes of E10
- A software glitch in the power module that a reset can clear
- A burned relay or another electronic part on the power board
- An unstable supply voltage or a surge
1. Turn the refrigerator off at the breaker. 2. Wait five minutes, then restore power. 3. If E10 reappears, write down what the unit is still doing: cooling, lights, fans. 4. Keep the doors shut and call a technician with those notes.
- This board switches mains voltage to the compressor and the fans, so testing it safely and choosing the right replacement by FD number is a technician task.
- Heat from a failing board and live mains voltage make this a poor place for guessing.
Technical reference
- Code
- E10
- Appliance
- Thermador refrigerator
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Refrigerator codes
Is an outage enough to cause E10?
A surge or a shaky supply can upset the power electronics, which is the reason a full five-minute power reset comes first in the process.
Must the board always be replaced?
No. When the code disappears for good after a reset, nothing more may be needed. Only a code that keeps returning justifies a deeper look at the board.
Why does the technician ask for my FD number?
Boards vary between versions of the refrigerator, and the FD number on the rating plate lets them order the exact matching replacement. Bring the model and FD number to speed that up.
Is E10 still showing?
Our technician checks it in your home and hands you a written price before touching anything.