Thermador T18IF100SP
At only 17 3/4 inches wide, this is the narrowest freezer in the Freedom column family, and it usually sits beside a matching refrigerator or wine column behind a custom panel. Because the panel hangs on the door, its weight is something we look at early: a heavy overlay can pull on the SoftClose hinge and leave a thin gap at the gasket.
The ice maker makes this a small freezer with a real water line. With 3 lbs of storage and 2.4 lbs made per day, any slowdown shows up quickly. We start with the supply valve and filter, then the mold and fill tube, and last the freezer temperature itself.
Panel-ready units hide the cabinet, so we also confirm the 84 x 18 x 25 inch opening has not shifted before we slide the column forward for access.
Yes, the built-in ice maker and filter draw from a supply line. If ice slows down, we check that line, the valve and the filter before looking at the freezing system.
Panel weight or a slightly shifted hinge can keep the gasket from closing flat. We test the seal, adjust the door and check the switch that drives the indicator.
The listing describes the door as left reversible. Changing it involves hinges and the panel, so we handle it as a scheduled job with the panel removed.
Request a visit online in about a minute or phone our coordinators. Close-in neighborhoods often see a same-day slot; the outer counties usually get the next day across Houston.