A hum or buzz from a Thermador induction cooktop is usually normal. The cooktop heats the pan with a magnetic field, and that field can make the pan and the glass vibrate slightly, especially on high power. A cooling fan also runs during and after cooking. Buzzing with no pan on the surface, or a grinding fan, is different and needs a technician.
Why does an induction cooktop make noise at all?
Induction does not heat the glass. It sends a rapidly changing magnetic field into the base of the pan, and the pan itself becomes the heat source. That energy transfer can make the metal vibrate in tiny amounts. You hear those vibrations as a hum or buzz, and the sound often changes pitch when you change the power level.
Layered pans, such as clad stainless steel with an aluminum core, tend to buzz more than a single heavy layer of iron. Lighter pans, warped bases and pans that are too small for the zone are also louder. Because the noise comes from the cookware as much as from the cooktop, the same zone can be silent with one pot and loud with another.
A cooling fan under the glass protects the electronics from the heat that builds up during cooking. It can keep running for a few minutes after you switch the zones off, and in a Houston summer, when the kitchen is already warm, you may notice it more often.
Which sounds are normal and which are not?
The table below sorts the most common sounds by what they usually mean. Use it to decide whether a sound is part of normal operation or worth a closer look.
| Sound | Likely cause | What you can check | When to call |
|---|---|---|---|
| Low hum that changes with power level | Normal magnetic field vibration in the pan | Try another pan with a flat, heavy base | Not needed unless it becomes much louder |
| Soft clicking on low settings | The cooktop cycles power on and off to hold a low heat | Listen for a steady rhythm on one zone | Not needed if heating is even |
| Fan running after you switch off | Normal cooling of the electronics | Confirm the fan stops within a few minutes | If it never stops or never starts |
| Louder buzz with a light pan | Thin or layered cookware vibrating | Swap in a heavier pan and compare | Not needed if the noise drops |
| Rattle or grinding under the glass | Worn or obstructed cooling fan | Check that the vents are not blocked | Right away, and stop using the cooktop |
| Buzz with nothing on the surface | Electrical problem under the glass | Switch the cooktop off at the breaker | Right away |
| Crackle or pop with a burning smell | Damaged electronics or wiring | Switch off at the breaker and leave it off | Right away |
What can you test at home?
Start with the pan, since it is the most common source of noise. Make sure the cooktop is cool and that all zones are off before you begin.
- Try a different pan with a flat, heavy base on the same zone and compare the sound.
- Move the pan so it sits centered on the zone marking, and use a pan that is close to the size of the zone.
- Check that the vent openings below the cooktop or inside the cabinet are not blocked by stored items such as trays or baking sheets.
- Write down which zone and which power level make the noise, and whether it happens with every pan.
Airflow matters because the fan needs room to move air. Cabinets packed tightly under a built-in cooktop can trap heat and make the fan work harder and louder. Clearing that space costs nothing and sometimes solves the problem on its own.
If the cooktop overheats and shuts a zone down, or a code appears on the display, write the code down exactly as it appears. It helps the technician narrow the cause before the visit starts.
When should you call a technician?
Call when the sound is new, loud or getting worse, even if the cooktop still heats. A fan that rattles or grinds is wearing out, and a fan that stops can let the electronics overheat and shut zones down in the middle of cooking. Buzzing that continues with no pan on the glass points to an electrical problem, not to cookware.
Any burning smell, crackling or popping means you should switch the cooktop off at the breaker and leave it off. Do not remove the glass or open the cabinet area to look at the wiring yourself. Our technicians listen to the sound at different settings, check the cooling fan and the airflow under the cabinet, and test the power boards before recommending a repair.
Frequently asked questions
Is it safe to keep cooking while the cooktop hums?
Yes, a steady hum that changes with the power level is normal for induction. It is safe to keep cooking as long as the cooktop heats evenly and there is no burning smell, crackling or grinding. Stop and switch the breaker off if any of those appear.
Do all induction pans buzz the same?
No. Heavy, flat pans made of one thick layer are usually quieter. Thin, light or layered pans vibrate more, especially on high. If one pan is much louder than the rest, the pan is the likely cause, not the cooktop.
Why does the fan keep running after I turn the cooktop off?
The fan removes heat from the electronics under the glass, so it often runs for several minutes after cooking. That after-run is normal and protects the cooktop. It is a problem only if the fan never stops or never starts.
Can a blocked cabinet make the cooktop louder?
Yes. If the vent openings are covered by stored items, the fan has to work harder to move air, and the cooktop may run hotter. Keep the space under and around the cooktop clear, and note whether the noise changes afterward.