Thermador ESC30/GSC30 Range F1: Supervisory Relay Enable Shorted
When a legacy 30-inch ESC30 or GSC30 range (electric or gas) displays F1, its safety supervisor has found a bake or broil relay stuck closed, which means an element could be getting power it should not.…
- Code
- F1
- Appliance
- Range
- Brand
- Thermador
- Warranty
- 30-day workmanship
What F1 means
When a legacy 30-inch ESC30 or GSC30 range (electric or gas) displays F1, its safety supervisor has found a bake or broil relay stuck closed, which means an element could be getting power it should not. Pressing Cancel may clear the display, but if the cause is still present, F1 returns after 16 seconds. Newer Thermador ovens use F1 differently.
Usual causes of F1
- Bake or broil relay stuck closed
- Relay board failing
1. Press Cancel and see whether the display clears. 2. If F1 returns in about 16 seconds, switch the oven off at the control. 3. Turn off the range breaker and leave it off until we arrive. 4. Do not keep trying to bake or broil in the meantime.
- A relay stuck closed can keep an element energized.
- The manual's remedy is a relay board replacement, which is technician work.
- We quote in writing first, with parts availability checked by model number.
Technical reference
- Code
- F1
- Appliance
- Thermador range
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Range codes
Why does F1 come back after 16 seconds?
Cancel only clears the message. If the relay is still stuck closed, the supervisor detects it again and shows F1 within about 16 seconds. That repeat is the clue we look for.
Is it safe to leave the breaker on?
Because a relay may be stuck closed, switching the breaker off is the cautious choice until a technician has checked the range and told you what is happening.
Is F1 here the same as F1 on the RDF range?
No. The RDF and REF ranges use F1 for stuck buttons or a stuck latch switch. Check your model number before comparing the two. The two codes are unrelated.
Is F1 still showing?
Our technician checks it in your home and hands you a written price before touching anything.