Reading F61 on Older Thermador C/CM Wall Ovens (Lower Oven Sensor Open)
F61 on an older Thermador C, CM or CJ302 oven says the lower oven sensor circuit is open, as if a wire were cut or a plug had come loose. With no temperature signal, the oven…
- Code
- F61
- Appliance
- Oven
- Brand
- Thermador
- Warranty
- 30-day workmanship
What F61 means
F61 on an older Thermador C, CM or CJ302 oven says the lower oven sensor circuit is open, as if a wire were cut or a plug had come loose. With no temperature signal, the oven will not bake from that cavity. This code belongs to the legacy service table for these models and sits beside F60, which is the shorted version of the same sensor problem.
Usual causes of F61
- Open circuit in the lower oven sensor wiring
- Loose connection or poor solder joint at the sensor header
- Sensor that no longer measures about 1080 ohms
- Power/relay board, when the sensor tests good
1. Switch the lower oven off and allow it to cool. 2. Reset with OFF or the breaker, waiting 3 minutes. 3. Turn power back on and try a short bake. 4. If F61 reappears, record it with your model number and call. Leave all wiring covers closed.
- An open circuit is found by testing, not by looking
- Solder joints on the header need proper tools to repair
- Guessing at a new sensor leaves a bad connection untouched
Technical reference
- Code
- F61
- Appliance
- Thermador oven
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Oven codes
Open versus shorted: what is the difference?
Open means the sensor loop is broken, so no signal passes. Shorted means the loop is bridged. Both stop the oven, and a technician tells them apart by resistance readings.
Could this clear on its own?
A loose connection can make it intermittent, so a reset may work for a while. Because it can return mid-bake, we recommend a check before holiday cooking.
Do you stock sensors for old ovens?
We confirm what a legacy oven needs by model number and give a written quote before any work. We do not promise a part until the model is checked.
Is F61 still showing?
Our technician checks it in your home and hands you a written price before touching anything.