Thermador Wall Oven E14 on CT/CMT Ovens with Dreefs Control: Loose Latch Switch
When E14 appears on a legacy Thermador CT or CMT oven with a Dreefs control, the latch switch is the suspect. The second page of the service document describes it as loose and says to check…
- Code
- E14
- Appliance
- Oven
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E14 means
When E14 appears on a legacy Thermador CT or CMT oven with a Dreefs control, the latch switch is the suspect. The second page of the service document describes it as loose and says to check the latch for proper operation. Heat is switched off on the failed oven, and the manual does not tell you to expect the message to clear on its own, so inspection is the sensible next step.
Usual causes of E14
- Loose latch switch
- Latch assembly not seating or operating properly
- Intermittent contact in the latch wiring (a technician check)
1. Set the selector to OFF and nudge it counterclockwise to end the alert. 2. Make sure the oven has cooled, then close the door normally without slamming it. 3. Try a short bake only if the oven responds. 4. If E14 returns, switch the oven off at the breaker and call us.
- A loose switch can pass a quick test and fail mid-cycle
- Tightening or replacing the latch needs the door area opened
- Legacy latches are confirmed by model number, and our quote comes in writing first
Technical reference
- Code
- E14
- Appliance
- Thermador oven
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Oven codes
Could slamming the door cause E14?
Hard closing might shift a loose switch, but the manual simply calls it a loose latch switch. Close the door gently, and mention any rattling or a door that feels different when you call.
Is E14 serious?
The oven loses heat on the affected side, so cooking is affected. It is not described as a runaway or overheating code, but we still suggest an inspection before using the oven normally.
What will you check on a visit?
We check the latch for proper operation, as the document says, then test its switches and wiring. You get a written price before we replace or tighten anything.
Is E14 still showing?
Our technician checks it in your home and hands you a written price before touching anything.