Thermador Dishwasher E9210 Flags a Bottom Spray Arm That Will Not Turn
You will find this code in the owner manual, though not on Thermador's website. The control concluded that the lower spray arm is not rotating properly. The manual offers three explanations in descending likelihood: dishes jamming…
- Code
- E9210
- Appliance
- Dishwasher
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E9210 means
You will find this code in the owner manual, though not on Thermador's website. The control concluded that the lower spray arm is not rotating properly. The manual offers three explanations in descending likelihood: dishes jamming the arm, the arm not clipped on correctly after cleaning, and filters so clogged that the arm gets little water.
Usual causes of E9210
- A long utensil or tall item sliding through the lower rack into the arm's path
- A lower arm that was not seated properly after cleaning
- Filters dirty enough to starve the arm of water
- Spray nozzles on the arm that have clogged
1. Turn the machine off and slide out the lower rack. 2. Turn the lower spray arm by hand; it ought to rotate smoothly all the way around. 3. If it snags, look for a handle or platter that slipped down through the rack. 4. After recent cleaning, press and twist the arm until it locks, then check the filters.
- When the arm spins freely, the filters are clean and the number stays, the circulation pump or the arm's bearing is the likelier source.
- Working around the issue leaves the bottom rack coming out dirty on every load.
Technical reference
- Code
- E9210
- Appliance
- Thermador dishwasher
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Dishwasher codes
Why can't I find E9210 on the Thermador site?
The list posted online does not cover every number the control can display. This one appears in the owner manual packed with current machines. We keep the explanation in plain language.
Which dishes suffer most?
Those in the bottom rack, because that arm is the subject of the code. Pots and plates come out worst, while glasses above may look acceptable.
Could tiny nozzle holes be the cause?
They can. Debris clogs those holes, so we examine them along with the arm's seating and the filters before turning to the circulation pump. Questions are welcome at any point during the visit.
Not sure about E9210?
Our technician checks it in your home and hands you a written price before touching anything.