E6 on older Thermador CT and CMT ovens with the Dreefs control carries two readings. The first table calls it a control board problem; a second page says selector switch and notes that individual cook modes…
E6 on older Thermador CT and CMT ovens with the Dreefs control carries two readings. The first table calls it a control board problem; a second page says selector switch and notes that individual cook modes in the affected oven stop working. Either way CLEAN is disabled in both ovens, and the message can be tweaked away for an immediate retry. We confirm on site which reading applies to your unit.
1. Turn the selector knob to OFF. 2. Tweak it slightly counterclockwise until the flashing and beeping stop. 3. Turn it to the mode you want and see whether the oven responds. 4. If a mode will not start or E6 returns, stop trying other positions, switch off the oven's power and call us.
One page words it as a control board problem and another as the selector switch. Both produce the same display, so a technician checks each before replacing anything.
The document says individual cook modes in the affected oven can be disabled, while CLEAN is disabled in both. Try the modes you need once after the reset, and tell us which ones fail.
You can tweak it away for a retry, but if the selector or board is worn it will likely return. A repeat means it is time to book an inspection.
Our technician checks it in your home and hands you a written price before touching anything.