Six induction elements, a Fully Usable Cooking Surface and a TFT touchscreen are shared by the CIT36YWB and the CIT36YWBB; the difference is the stainless steel frame around the glass of the CIT36YWB. The rating is 7,200 watts on a 30-amp circuit, with TeppanyakiPro mode and automatic cookware detection.
A frame means a seam, and a seam means a seal between glass and trim. That gives this model a possible weak spot that a frameless cooktop lacks: spills that find their way past a worn seal or loose clips can reach the electronics under the glass. When behavior is erratic, we inspect the frame and its clips before blaming the electronics alone.
The rest follows the usual induction order: a known-good pan placed in the middle of the zone, a clean glass surface, and a close look at the display if the screen is dim or frozen.
The seam between glass and stainless trim is sealed, and if that seal or the clips weaken, liquid can slip under the glass. We check it when behavior is erratic or moisture shows at the edge.
A dim or frozen screen usually points to the display or its control board and not to the heating zones. Heating may still work, but the screen should be tested before the problem spreads.
Their specifications match, with six elements and 7,200 watts. The CIT36YWB has the stainless frame, while the CIT36YWBB is frameless with edge-to-edge glass in the same Dark Gray finish.
Request a visit online in about a minute or phone our coordinators. Close-in neighborhoods often see a same-day slot; the outer counties usually get the next day across Houston.