Booking today · Houston · three-hour arrival windows Thermador repair specialists, independent · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 597-4873 Book an Appointment
Safety & Risks · 5 min read

Water in the Base of a Thermador Dishwasher: E15 and E3100

Water in the base of a Thermador dishwasher with E15 or E3100 means a moisture switch tripped. Shut off the water supply and have a technician trace the leak.

When a Thermador dishwasher shows E15 or E3100, a protective switch has sensed water collecting in the base of the machine. Thermador’s guidance is to shut off the water supply and contact service. Do not run more cycles. Doing so can turn a small leak into a larger one and does nothing to fix the cause underneath.

What do E15 and E3100 mean?

Both codes report the same kind of event. A float or moisture switch in the base pan detected water where it should never be, and the dishwasher stopped to protect your floor and cabinets. The switch is behaving exactly as designed, so the code is a warning to act on, not a nuisance to clear.

Water in the base can come from several places: a hose, a door seal, a fill or drain connection, or something inside the tub. The display cannot say which one, which is why a quick reset tells you nothing about the real problem.

What should you do right now?

  1. Stop the dishwasher and close the water supply valve.
  2. Switch off power at the breaker if the floor around the machine is wet.
  3. Soak up any water you can see on the floor.
  4. Leave the door closed and do not start another cycle.
  5. Write down the code and anything unusual you noticed, such as a smell, a drip, or damp cabinet wood.

Take care when walking near the dishwasher if water has reached the floor, and keep towels handy. If the cabinet beside it looks damp, remember that detail. It helps show how long the water may have been escaping.

Why is this code different from other dishwasher messages?

Most dishwasher messages invite a little testing of your own, such as cleaning a filter or running a short cycle. This is among the few Thermador codes we treat as a stop-and-call situation. Cutting off the supply is the right response, not resetting the machine and trying again.

In a humid Houston kitchen, a small amount of condensation can be mistaken for a leak, but a switch that trips on E15 or E3100 means real water collected in the base. Treat it as a leak until a technician proves otherwise.

How do the common leak sources compare?

Possible source What you may notice What you can check Who fixes it
Door seal Water at the front edge after a cycle Look for a torn or dirty seal, with the power off Technician
Supply hose or connection Dampness under the sink or at the inlet Look for drips with the supply closed Technician
Drain hose or fitting Water after the drain phase Look for kinks or wet spots beneath the unit Technician
Spray arm or tub leak Water sprays or seeps inside the tub Check for cracks or loose arms without running a cycle Technician
Overfilling Water in the base with no outside drip Note whether the problem repeats every cycle Technician

The right-hand column is the same on every row for a reason. Finding the source takes inspection with the machine pulled forward, and the repair depends on the part involved.

What does a technician look for?

A technician traces where the water is coming from, whether a hose, a seal, a connection, or something inside the tub. Then the base is dried out and the switch is confirmed to read correctly before the dishwasher runs again.

When you describe the problem, say which code appeared, whether the floor was wet, and whether the cabinet beside the dishwasher looked damp. Photos help. Those notes shorten the diagnosis and tell us what to look at first.

How can you limit damage while you wait?

The first hour matters most. Water that sits under a dishwasher can soak the subfloor, swell the cabinet base, and feed mold in a warm, humid kitchen. Mop up what you can reach, lay towels along the front edge, and run a fan in the room if it is safe to do so. Keep the supply valve closed the whole time.

Do not pull the dishwasher forward yourself. It is heavy, it is connected to water, drain, and power, and a hose can be strained or knocked loose when the unit moves. If water keeps appearing after the supply is closed, the source may be the drain side, so mention that when you describe the problem.

Once the repair is done and the base is dry, run the first cycle while someone watches the floor. A quick look after the first rinse and the first drain confirms the leak is truly gone and the switch reads normally. Wipe the area with a dry towel before you walk away.

Frequently asked questions

Can I reset the dishwasher and keep using it?

No. The code means water was detected in the base, and the switch will keep stopping the machine for a reason. Running it again risks a bigger leak and water damage to the floor or cabinet. Keep the supply valve closed until the source of the water has been found and repaired.

Is it safe to leave the dishwasher plugged in?

If the floor around it is wet, switch off the breaker first and keep your distance from standing water near outlets. If the floor is dry and nothing is dripping, the machine can stay idle with the supply closed. Never reach for a plug or switch while standing in water.

Will the water damage my cabinets?

It can, particularly if it has been escaping for a while. Wood and particleboard swell when they stay damp. Drying the area quickly and having the source repaired limits the damage. Tell the technician if the neighboring cabinet or the floor feels soft or looks stained.

Does it matter which code appears, E15 or E3100?

Both point to water in the base, and Thermador gives the same instruction for each: shut the water off and get service. The number may depend on the model. Write down exactly what the display showed so the technician can match it to your dishwasher.

Sources

A Thermador kitchen deserves a technician who knows it.

(713) 597-4873 Book an Appointment
☎ Call our office ▤ Book an Appointment