Thermador Range E2 on Legacy PDR/PRG Models, Light Code 01: Control Not Calibrated
Some older Thermador Professional Series ranges (PDR30/36/48 and PRG30/36/48) report E2 with a short light routine: the blue oven light blinks once, then the heating light blinks once. The service document calls this a control that…
- Code
- E2
- Appliance
- Range
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E2 means
Some older Thermador Professional Series ranges (PDR30/36/48 and PRG30/36/48) report E2 with a short light routine: the blue oven light blinks once, then the heating light blinks once. The service document calls this a control that is not calibrated, meaning the oven control lacks valid calibration data to work from. The same E2 label means something else on newer Thermador models.
Usual causes of E2
- Oven control without valid calibration
1. Watch the blue lights and confirm it is one blink, then one blink. 2. Switch the oven off at the panel. 3. Wait a few minutes, then turn the range breaker off and on. 4. Try a short preheat. If the single-blink pair returns, leave the oven off and book a visit.
- Calibration is stored in the control and cannot be redone from the front panel.
- Oven temperatures may be off until it is addressed, which can ruin a roast.
- We write down the price before touching the control, so you decide with the number in hand.
Technical reference
- Code
- E2
- Appliance
- Thermador range
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Range codes
What does one blink and then one blink mean?
On the legacy PDR and PRG ranges that pattern is code 01, which the service document lists as E2, control not calibrated. Note it down and tell us when you call.
Is this the same E2 my neighbor's newer Thermador shows?
Not necessarily. Newer Thermador units use E-numbers in their own way, so the meaning here applies only to the older Pro-Harmony ranges described above. Send us your model number.
Will you need the model number?
Yes. The number on the rating plate lets us confirm the exact range before we quote, and we always put the quote in writing first.
Is E2 still showing?
Our technician checks it in your home and hands you a written price before touching anything.