Thermador C/CM/CJ Wall Oven Code F13: Power Board Not Calibrated, Air Switch Check
When an older Thermador C-series, CM or CJ oven shows F13, the power board reports that it is not calibrated. The legacy service table adds one extra check beyond the board: whether the air switch is…
- Code
- F13
- Appliance
- Oven
- Brand
- Thermador
- Warranty
- 30-day workmanship
What F13 means
When an older Thermador C-series, CM or CJ oven shows F13, the power board reports that it is not calibrated. The legacy service table adds one extra check beyond the board: whether the air switch is jammed. These manuals print codes as F plus two digits for several Thermador generations, so we match F13 to your model number first. Cooking is interrupted until the cause is found.
Usual causes of F13
- Jammed air switch, which the manual checks first
- Power/relay board that is not calibrated, replaced if the air switch is fine
1. Press OFF or cut the oven's power at the breaker for three minutes. 2. Restore power and see whether the display clears. 3. If F13 comes back, write down the code and call us. Looking at the air switch means opening the control area, so we handle that.
- An air switch looks simple but sits next to powered boards
- Skipping the air switch check can lead to an unneeded board
- We confirm legacy parts by model number and quote in writing before work
Technical reference
- Code
- F13
- Appliance
- Thermador oven
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Oven codes
What is an air switch doing in my oven?
It senses airflow from the cooling fan, so the control knows the electronics are being cooled. If it jams, the control cannot confirm airflow and may refuse to continue.
Is F13 related to F34?
They both involve air switches in this oven family, but F34 names the upper oven cooling fan switch directly. F13 is a calibration code where the switch is only the first check.
Should I try to free a jammed switch?
No. It lives behind panels, near wiring. A technician can free or replace it safely and then confirm whether the power board still needs attention.
Is F13 still showing?
Our technician checks it in your home and hands you a written price before touching anything.