Thermador C/CM/CJ Wall Oven F22 Upper CANCEL Key Shorted Low
F22 is the opposite reading of F20 on older Thermador C271 through CJ302 ovens: the upper oven's CANCEL key looks shorted low instead of high. The control cannot tell a real touch from a failing connection,…
- Code
- F22
- Appliance
- Oven
- Brand
- Thermador
- Warranty
- 30-day workmanship
What F22 means
F22 is the opposite reading of F20 on older Thermador C271 through CJ302 ovens: the upper oven's CANCEL key looks shorted low instead of high. The control cannot tell a real touch from a failing connection, so it posts the code. The legacy table points at the touch panel link and boards. Newer Thermador ovens may attach another meaning to F22.
Usual causes of F22
- Display board to touch panel connections
- Control display board, touch panel, or both, if the connections check out
1. Wipe the glass and surrounding trim dry. 2. Switch off the oven at its circuit breaker. 3. Count a full three minutes before restoring power. 4. If F22 comes back, note it and call us. Anything beyond the exterior, including the ribbon behind the panel, stays with a technician.
- Low and high shorts need a meter to separate
- Opening a panel on a built-in oven exposes live parts
- We quote in writing and confirm legacy parts by model number
Technical reference
- Code
- F22
- Appliance
- Thermador oven
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Oven codes
What is the difference between shorted high and shorted low?
The control sees an opposite electrical level. Both indicate the CANCEL pad circuit is not behaving, and the manual gives the same checks for each, so the distinction mostly helps our technician.
Is F22 dangerous?
It is rated low severity in our notes. The oven is not telling you about heat or electrical hazard, only that a key reads wrong. Still, a stuck CANCEL may stop you from ending a cycle, so please have it checked.
Could a child touching the panel cause it?
A momentary touch would not typically latch a code. A persistent code points to the connection or panel hardware, which is why we inspect rather than just reset.
Not sure about F22?
Our technician checks it in your home and hands you a written price before touching anything.