Thermador POD Built-In Oven Err on Legacy POD301, POD302, PODC302, PODM301 and PODMW301: Invalid Temperature
Err on a legacy Thermador POD built-in oven (POD301, POD302, PODC302, PODM301 or PODMW301, 'J' revision manuals) is not a breakdown. A beep sounds and the display shows Err when you enter a temperature outside the…
- Code
- Err
- Appliance
- Oven
- Brand
- Thermador
- Warranty
- 30-day workmanship
What Err means
Err on a legacy Thermador POD built-in oven (POD301, POD302, PODC302, PODM301 or PODMW301, 'J' revision manuals) is not a breakdown. A beep sounds and the display shows Err when you enter a temperature outside the range allowed for the selected cooking mode. The oven simply will not start until you set a valid temperature.
Usual causes of Err
- Temperature entered that is outside the allowed range for the selected mode
1. Press OFF to clear the entry. 2. Choose the cooking mode again. 3. Enter a temperature inside the range allowed for that mode, checking your manual. 4. If Err shows with a valid temperature, call us with the model number.
- Most cases are a setting issue, not a repair
- A true control failure would need an on-site test
- We would rather you check the range first than pay for a visit
Technical reference
- Code
- Err
- Appliance
- Thermador oven
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Oven codes
Is Err a sign of a broken oven?
Not by itself. The manual says it appears when the temperature is outside the allowed range for the cooking mode, and the oven will not start.
Where do I find the allowed range?
In your use-and-care manual under the cooking modes. Ranges differ by mode, so a number that works for baking may not work for another mode.
What if Err stays with a valid setting?
Then something else is wrong and a technician should test the control. Note the mode, the temperature, and your model. A quick note of when it happened is useful.
Not sure about Err?
Our technician checks it in your home and hands you a written price before touching anything.