Legacy Thermador Cooktop F2 for CIT365DS and CIT304E Induction: Element Too Hot (Older Generation)

What F2 means

Seeing F2 on a CIT365DS or CIT304E induction cooktop means the element got too hot and turned itself off. This is the older generation's reading; on current Thermador induction cooktops F2 is an overheated-electronics message instead. The shut-off is protective, so once the surface cools and you touch a key to acknowledge the display, normal cooking is usually available again.

Usual causes of F2

Pan boiled dry or run empty on the element
Extended high-power cooking heating the element
Element still hot when the cooktop was restarted

✓ A safe check worth trying

1. Take the pans off the cooktop. 2. Wait until the element has cooled. 3. Touch a key to acknowledge the display so F2 clears. 4. If F2 keeps returning, leave the cooktop off and note how long you cooked before it appeared.

! Why you should stop here

A heat-protection circuit that trips again and again needs testing under power.
Sensor and board checks on these older units require meters.
Written price first, with parts confirmed by model number.

Taking off a panel yourself does not by default void a manufacturer warranty, yet it can lead to accidental damage, and some manufacturers attach their own service terms. Read your warranty paperwork, or ask us, before you decide.

→Same appliance

More Cooktop codes

E9011Thermador Induction Cooktop E9011 Connection Error F8Thermador Cooktop F8 on Older CIT365DS and CIT304E Induction Units: Element Ran Too Long, Auto Shut-Off F0Thermador Induction Cooktop F0 Error Code (MoveMode) c1Older Thermador Cooktop c1 on CIT365DS and CIT304E Induction Models: Supply Voltage Too Low F1Thermador Induction Cooktop F1 / F6 Error Code c2 / c3Legacy Thermador Cooktop c2 / c3 on CIT365DS and CIT304E Induction Units: Element Overheated, Deactivated F9Thermador Induction Cooktop F9 Error Code (Flex Zone) U400Older Thermador Cooktop U400 on CIT365DS and CIT304E Induction Models: Cooktop Connected Incorrectly

F2F2 questions

Why does F2 show up when nothing seems hot?

The surface can feel fine while the element sensor still reads high. Wait longer and try again. If F2 appears on a cold cooktop, the sensor or board needs inspection.

Is F2 on CIT365DS the same as on a current Thermador induction cooktop?

No. Current cooktops use F2 for overheated electronics, while this older table says the element is too hot. Match any code to your model before following advice.

Do I have to acknowledge the display?

Yes. The manual says F2 clears when you touch a key after the element has cooled. If the display won't clear even after cooling, call for service.