Booking today · Houston arrival windows 8–10 · 10–12 · 12–2 · 2–4 Thermador repair specialists, independent · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 597-4873 Book an Appointment
Model library · Thermador Oven

ME271

Thermador ME271

What we most often repair on units like this

  1. Breaker or wiring does not match the documented 30A requirement
  2. Heating element wears out after long service
  3. Door seal or hinge gets old and affects how evenly the oven bakes
  4. Timer or clock assembly stops working on older electromechanical controls
  5. Corrosion at the hardwired junction box

Where cabinets are narrower, the ME271 fits: it is a 27-inch single built-in electric oven, the slimmer sibling of the 30-inch M301 and ME301 from the same Thermador generation. It shares their electrical design, a four-wire, single-phase feed accepting 208V or 240V, and Thermador’s installation manual puts its circuit at 30 amps whichever voltage is used.

Because this is a legacy oven without smart features, service rarely involves software. Calls usually trace to wear: heating elements, door seals, and the aging timer or clock assembly of the period. On any oven this old we also check the connections inside the junction box for corrosion.

We begin by confirming the breaker and supply against that 30A figure, since a mismatch there can mimic an oven failure and save you from paying for parts you do not need.

Key features

  • Built-in electric wall oven, 27 inches wide, one cavity
  • Four-wire, single-phase connection that accepts 208V or 240V AC
  • Documented circuit: 30A at either voltage
  • Its 27-inch cutout is narrower than the 30-inch ME301 from the same period
→Codes

Codes this model may display

ME271ME271 questions
How wide is the ME271?

It is 27 inches, narrower than the 30-inch M301 and ME301 built the same way during this generation, so it needs a smaller cutout than those two ovens.

Which breaker size applies?

Thermador's installation manual says 30 amps, and that number stays the same whether the oven is fed with 208V or with 240V, so one breaker rating covers both cases.

Is there any app or Wi-Fi to troubleshoot?

None. This is a pre-Home Connect legacy oven with no smart features, so diagnosis centers on elements, door seals, the timer or clock, and the wiring connections.

Request service

Schedule service for your ME271

Request a visit online in about a minute or phone our coordinators. Close-in neighborhoods often see a same-day slot; the outer counties usually get the next day across Houston.