MED302JP

What we most often repair on units like this

1. Safety switch-off tripping the oven during a long bake
2. Lower oven slow to heat, or Max Convection Broil not firing
3. Fan noise or stalled airflow
4. Door lock holding on after cleaning
5. Hinge dampers worn
6. Sensor drift between cavities

Two cavities with near-identical capability is the idea behind the MED302JP: 4.7 cu. ft. each, 14 modes above and 13 below, so a recipe can run in either oven. What sets it apart in a service call is the safety switch-off function. If a cavity has been on for a very long time the oven turns itself off, and customers who did not set it often assume the oven has failed.

That makes the first question simple: did the oven shut down on its own, or did a part fail? We read the control’s behavior, then test the cavity the way it should work. Lower-oven Max Convection Broil leans on the broil element at its hardest, so an element that is cracked or sagging shows up there.

Power is 8000 watts at 40 amps, so we confirm both legs of the 240/208 volt feed. The electronic lock and SoftClose hinges are inspected last, and a written estimate precedes any order.

Key features

• Built-in double oven with Professional handle, stainless steel with black trim
• 4.7 cu. ft. in each cavity, 14 modes up top and 13 below (Max Convection Broil included)
• 3D hot air, Dehydrate and Proof
• Self Clean system with 36 CookSmart auto programs
• Childproof lock, electronic door lock, safety switch-off function
• SoftClose hinges, three racks per cavity
• Runs on 240/208 V with 8000 W and a 40 A draw