Booking today · Houston arrival windows 8–10 · 10–12 · 12–2 · 2–4 Thermador repair specialists, independent · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 597-4873 Book an Appointment
Model library · Thermador Dishwasher

DWHD770WFP

Thermador DWHD770WFP

What we most often repair on units like this

  1. Sanitation option that ends without reaching the target
  2. Save Time cycle that leaves residue
  3. Drawer arm that leaks at its connection
  4. Blue light that is inconsistent
  5. Pump that hums but does not drain fully

At 42 dBA the DWHD770WFP is the quieter sibling in the Sapphire family, and its Sanitation option is the feature we get asked about by households with babies or with someone who cooks for large groups. Reaching a sanitizing temperature depends on the heater and a temperature sensor, and both are tested when owners say the dishes are not as hot as they used to be.

Thermador shows this model as no longer available and points to the DWHD760CFP as the model that replaces it. That is useful for us, since the replacement shares the same footprint, 33 7/8 x 24 x 24 inches, and similar parts.

We run a cycle with a thermometer, check the filter and the pump, then open the spray arms. A pump that hums without draining is usually a clog in the drain path, and we clear it before blaming the motor.

Key features

  • Sapphire built-under dishwasher, 16 place settings, Professional collection with bar handle and Stainless Steel panel
  • Cycle list: Pots & Pans, Auto, Normal, Hand Wash, 1 Hour, Quick and Rinse
  • Options: Remote Start, PowerBoost, Save Time, Half Load, Sanitation and StarDry with zeolite
  • Powerfully Quiet at 42 dBA; Stainless Steel tub
  • Sapphire Glow blue light, Spacious Adjustable Chef's Tool Drawer and floor PowerBeam countdown
  • 33 7/8 x 23 9/16 x 23 3/4 inches overall; 33 7/8 x 24 x 24 inch cutout; 90 1/2 inch outlet hose
→Codes

Codes this model may display

DWHD770WFPDWHD770WFP questions
How do I know whether Sanitation really heated the water?

We measure the water temperature during a cycle. If the heater or sensor is failing, the temperature will lag. Then we test the parts individually before replacing them.

The pump hums but the water does not leave. What now?

A clog in the drain hose, the check valve or the impeller is common. Stop the cycle, and we will clear the path and test the pump motor for proper rotation.

Can this unit be replaced with its successor easily?

The cutout of 33 7/8 x 24 x 24 inches matches, which helps. We can advise, but repairs often cost less than a new unit if parts are available.

Request service

Schedule service for your DWHD770WFP

Request a visit online in about a minute or phone our coordinators. Close-in neighborhoods often see a same-day slot; the outer counties usually get the next day across Houston.