Thermador Dishwasher “All LEDs light up or flash”: Update or Reset
Every indicator on the control panel lights up or blinks at once and the dishwasher will not start. On the DWHD660EFM and other E-generation models the manual gives two readings: a software update may be installing,…
- Code
- All LEDs light up or flash
- Appliance
- Dishwasher
- Brand
- Thermador
- Warranty
- 30-day workmanship
What All LEDs light up or flash means
Every indicator on the control panel lights up or blinks at once and the dishwasher will not start. On the DWHD660EFM and other E-generation models the manual gives two readings: a software update may be installing, which can take about 30 minutes, or the electronics have detected a problem. Waiting and then resetting is the first move, and a recurring pattern means service.
Usual causes of All LEDs light up or flash
- A software update installing in the background
- A problem detected by the electronics that a reset can clear
- A repeat of the same problem after power was restored, which points to the control board
1. Leave the dishwasher alone for about 30 minutes in case an update is running. 2. If it is still not ready, hold the main switch for about 4 seconds to reset it. 3. If the lights return, switch it off at the breaker or unplug it for at least 2 minutes, then power it up again. 4. If it flashes a third time, call us.
- Repeated resets do not repair a control that keeps tripping, and they hide the pattern we need to see.
- Interrupting power during a real update can leave it stuck longer, so we confirm which situation you have before anything is opened.
Technical reference
- Code
- All LEDs light up or flash
- Appliance
- Thermador dishwasher
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Dishwasher codes
How long should I wait before resetting?
The manual says about 30 minutes, because that is how long a software update may take. If the lights are still flashing after that, hold the main switch for roughly 4 seconds to reset the machine.
Does this mean the dishwasher is broken?
Not necessarily. An update in progress looks the same as a detected electronics problem at first. Only if the pattern comes back after a reset and a 2-minute power-off does it become a service call.
Which models show this?
The manual covers the DWHD660EFM and the E-generation, including DWHD640E and DWHD661E, whose display uses E:xx-xx. Send us your model number and we will tell you whether the same steps apply.
Not sure about All LEDs light up or flash?
Our technician checks it in your home and hands you a written price before touching anything.