Thermador Dishwasher E23 and a Blocked or Failing Drain Pump
Water stays in the tub, the cycle stops, and E23 comes up. Thermador documents this code as a drain pump that is jammed, plugged or wearing out. Unlike a general drainage message, this one points at…
- Code
- E23
- Appliance
- Dishwasher
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E23 means
Water stays in the tub, the cycle stops, and E23 comes up. Thermador documents this code as a drain pump that is jammed, plugged or wearing out. Unlike a general drainage message, this one points at the pump itself, so the problem has been narrowed to the part that pushes the water out. That narrowing helps, because the search starts at one part instead of the whole drain system.
Usual causes of E23
- Food or glass stuck in the pump
- A drain pump motor that has worn out or failed
1. Turn the dishwasher off. 2. Remove the filter and look for obvious clogging in the sump area, rinsing the filter under the tap. 3. Refit the filter and run a short cycle to see if the water leaves. 4. If E23 returns, stop there and call us, because Thermador's guidance beyond this basic check is to contact support.
- For this particular code Thermador sends owners to support instead of to more home attempts.
- Telling a blocked pump from a dead motor takes testing, and the pump sits where careless fingers meet broken glass.
Technical reference
- Code
- E23
- Appliance
- Thermador dishwasher
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Dishwasher codes
How does E23 differ from E22?
They overlap, but E23 is narrower. E22 covers a wider set of drainage suspects such as the filter and hose. E23 singles out the drain pump, so a technician starts there.
Can a blockage be cleared without replacing anything?
Often, yes, if debris is what stopped the pump. We clear it and test the motor. A pump that hums but does not move water, or stays silent, usually needs replacing.
Will repeated cycles harm the pump?
A pump pushing against a blockage works hard without moving water, which is not good for the motor. It is better to stop running cycles once E23 appears.
Is E23 still showing?
Our technician checks it in your home and hands you a written price before touching anything.