Thermador Dishwasher E6001: Heat Pump Heater on Newer Controls
The wash seems to run without real warmth, then the cycle halts with E6001 on the display. Thermador groups this number with E2030 under one description, a heater problem inside the heat pump. The board decided…
- Code
- E6001
- Appliance
- Dishwasher
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E6001 means
The wash seems to run without real warmth, then the cycle halts with E6001 on the display. Thermador groups this number with E2030 under one description, a heater problem inside the heat pump. The board decided the heater is not doing its job and refuses to continue with an unreliable heat source. The control would rather stop than carry on, so the display keeps the number until the heater is dealt with.
Usual causes of E6001
- A burned-out heating part inside the heat pump
1. Switch the dishwasher's breaker off. 2. Leave it off for half a minute. 3. Switch it back on and wait for the display to start up. 4. Start a short cycle and see whether E6001 shows again; if so, stop and call us with the model number from the door edge.
- A reset that leaves the number on the display tells us the heater cannot be fixed by an owner.
- The heat pump sits behind panels with line-voltage wiring, so only someone able to isolate it should open it.
Technical reference
- Code
- E6001
- Appliance
- Thermador dishwasher
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Dishwasher codes
How does E6001 compare with E2030?
Thermador describes the two the same way. Your control platform decides which number you see, while the repair we perform is identical for either one.
The dishes get washed anyway. Why does heat matter?
Hot water lifts grease and heated air dries the load. Without a working heater the cycle may run, but cleaning and drying results suffer, which is why the control raises the alarm.
Does the whole heat pump need replacing?
Not automatically. The number points at the heater inside it, so we test that part first and send you a written price before replacing anything.
Is E6001 still showing?
Our technician checks it in your home and hands you a written price before touching anything.