E1 on a Thermador CT/CMT Wall Oven with Dreefs Control: Control Board Problem
E1 appears in the oven or selector window on legacy Thermador CT and CMT built-in ovens (convection and convection-microwave) that use the Dreefs control. The control has flagged a problem with its own board, so it…
- Code
- E1
- Appliance
- Oven
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E1 means
E1 appears in the oven or selector window on legacy Thermador CT and CMT built-in ovens (convection and convection-microwave) that use the Dreefs control. The control has flagged a problem with its own board, so it switches off the CLEAN cycle in both ovens while COOK and the microwave still work. Turning the oven off stops the message, and it comes back only when the selector is turned to CLEAN. Power must be cycled off and on to clear it.
Usual causes of E1
- Control board problem, which is how the service table words E1
- Selector switch or latch switch wiring that confuses the board (the same table names these parts for neighboring codes)
- Temperature sensor input read incorrectly by the control
1. Turn the selector knob to OFF, then nudge it slightly counterclockwise to stop any flashing or beeping. 2. Cut power to the oven for a moment at its breaker and restore it. 3. Use COOK normally and leave CLEAN alone. 4. If E1 returns the next time you select CLEAN, write down that detail and call us. Do not open the control panel.
- The control board and selector wiring sit behind live panels in a built-in oven
- Replacing a board without confirming the cause can leave the same message on screen
- Older Dreefs units need the model number checked before we quote, and we quote in writing first
Technical reference
- Code
- E1
- Appliance
- Thermador oven
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Oven codes
Can I keep baking while E1 is showing?
The manual says COOK and the microwave stay available while CLEAN is disabled. Avoid self-clean until the control is checked, because that is the only mode that brings the message back.
Why does E1 only return when I pick CLEAN?
After a power cycle the control stays quiet until the selector reaches CLEAN, which is the mode it has blocked. That pattern tells us the board is still flagging itself even though normal baking looks fine.
Is E1 the same on a newer Thermador wall oven?
No. Newer Thermador ovens use different code tables, and the same symbol can mean something else. This page covers only legacy CT and CMT ovens with the Dreefs control, and we confirm the model on site.
Is E1 still showing?
Our technician checks it in your home and hands you a written price before touching anything.