Thermador Built-In Oven, Dreefs Control, Code E3: Open Temperature Sensor on CT/CMT Models
On legacy Thermador CT and CMT ovens with the Dreefs control, E3 means the oven temperature sensor reads open, above 5000 ohms, as if the probe wire were broken or unplugged. The control turns heat off…
- Code
- E3
- Appliance
- Oven
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E3 means
On legacy Thermador CT and CMT ovens with the Dreefs control, E3 means the oven temperature sensor reads open, above 5000 ohms, as if the probe wire were broken or unplugged. The control turns heat off in the affected oven only, and the microwave is not affected on combination models. Once the control detects a good sensor again, tweaking the selector cancels the message. The manual action is simply to check the sensor.
Usual causes of E3
- Open circuit in the oven temperature sensor itself
- Loose or corroded sensor connector or broken sensor wire
- Control board input failing to read a sensor that is actually good
1. Move the selector to OFF, then give it a small counterclockwise tweak so the alert goes quiet. 2. Wait for the oven to cool before anyone reaches inside. 3. If a second oven is on the same unit, it can still be used. 4. If E3 returns when you start the affected oven, leave it off and call us.
- Reading sensor resistance needs the wiring accessed and a meter, not guesswork
- A new sensor will not help if the connector or board is the real problem
- Legacy parts are confirmed against the model number, and we quote in writing first
Technical reference
- Code
- E3
- Appliance
- Thermador oven
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Oven codes
Does E3 shut down both ovens on my unit?
Per the manual it turns heat off on the failed oven only. The other oven, and the microwave on combination units, should keep working. If something else dies too, mention it when you call so we can look wider.
What does 5000 ohms mean for me?
It is the resistance limit the control uses. Above it, the control treats the sensor as open and refuses to heat. You do not need a meter; it only tells our technician what to test.
Can tweaking the selector fix it for good?
The message can be canceled that way once a good sensor is detected. If it keeps coming back, the sensor, wiring or board still has a problem and we should inspect it.
Is E3 still showing?
Our technician checks it in your home and hands you a written price before touching anything.