Thermador Dishwasher E04 and the Heater Self-Test
The dishwasher performed its own start-up self-test, and one result from the heating electronics was outside what the control will accept, so E04 appears and the machine stops. Thermador documents this code as failing heater electronics…
- Code
- E04
- Appliance
- Dishwasher
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E04 means
The dishwasher performed its own start-up self-test, and one result from the heating electronics was outside what the control will accept, so E04 appears and the machine stops. Thermador documents this code as failing heater electronics found during that self-test. The unit checked itself rather than reacting to your loading, your detergent or the way the door was closed.
Usual causes of E04
- A part in the heater circuit that has failed
- A control board that can no longer read the heater circuit it supervises
1. Turn the dishwasher off with its normal button and let the display go dark. 2. Turn it on again and confirm it powers up and answers the buttons as usual. 3. Leave every panel closed and do not touch any wiring, because the heating circuit runs on line voltage. 4. Write down the code and the model number from the door edge, then call us.
- The heating circuit carries line voltage, so it should only be opened up with the power properly isolated.
- A self-test result points at electronics, and no owner-level check can tell which part is responsible.
Technical reference
- Code
- E04
- Appliance
- Thermador dishwasher
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Dishwasher codes
The machine turned back on after I switched it off. Is E04 gone?
A normal power-up only shows the display and buttons work. The heater test happens at the start of a cycle, so the code may return then. Keep the code number handy for the call.
Should I keep trying cycles to see if it clears?
For this code Thermador points owners to its support line, not to repeated trial runs. Extra attempts will not repair a failed part, and they leave the heating side unchecked for longer.
Does E04 mean the whole dishwasher is finished?
No. The code names heater electronics, which is a limited area. We confirm which part failed with a meter before quoting, and you get the price in writing before any work starts.
Is E04 still showing?
Our technician checks it in your home and hands you a written price before touching anything.