Legacy Thermador CT Oven E12 (Dreefs Control Table): Second Latch Switch Reading
On older Thermador CT ovens with the Dreefs control, E12 sits beside E11 as another latch switch entry. The service document says the oven will not clean and recommends replacing the latch. Heat shuts off on…
- Code
- E12
- Appliance
- Oven
- Brand
- Thermador
- Warranty
- 30-day workmanship
What E12 means
On older Thermador CT ovens with the Dreefs control, E12 sits beside E11 as another latch switch entry. The service document says the oven will not clean and recommends replacing the latch. Heat shuts off on the failed oven; turning the oven off stops the message, and you will see it again only if the selector goes back to CLEAN. CMT combination ovens share the same table, so we confirm the model on site.
Usual causes of E12
- Latch switch that does not change state when the latch moves
- Failed latch assembly, per the replacement advice
- Loose latch connection (a technician check before replacing anything)
1. Rotate the selector to OFF with a small counterclockwise nudge to quiet the alert. 2. Switch the oven's power off for a few seconds and restore it, as the document says for E12. 3. Use bake or broil if they respond. 4. Avoid CLEAN, and call us if E12 remains with the selector OFF.
- Running CLEAN again just retests a latch that has already failed
- The latch and its switches are inside the door assembly area
- Our written quote comes first, and part availability is confirmed by model number
Technical reference
- Code
- E12
- Appliance
- Thermador oven
- Maker documentation
- Thermador owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Thermador.
More Oven codes
Why does my oven show E12 only after I choose CLEAN?
The control checks the latch when it must lock the door for cleaning. Turning the oven off clears the message, so it reappears only when CLEAN is selected again.
Can I clean the oven by hand instead?
Yes, once it is cool, with mild cleaner and a soft cloth. Skipping the self-clean cycle avoids the latch test until we repair it, and it does not harm the oven.
Should I replace the latch myself?
We do not recommend it. The latch sits close to wiring that may be live, and a wrong swap can leave the door unable to lock. We can quote the repair in writing.
Is E12 still showing?
Our technician checks it in your home and hands you a written price before touching anything.